Replacing the front control arm bushing with the TEDGUM TED42843 puller

The puller enables correct mounting of the bushing directly on the car without having to remove the control arm bracket. The special design ensures quick and easy replacement. The puller is adapted to work with a socket wrench.

The universal construction of the puller fits all kind of bushings:

blank
Normal
blank
Reinforced
blank
Reinforced (full)

Below we describe the replacement process:

1

obraz obsługa ściągacza TED42843 1
Remove the old bushing and clean the socket.

2

obraz obsługa ściągacza TED42843 2
Lubricate the socket with a suitable agent.

3

obraz obsługa ściągacza TED42843 3
Position the bushing correctly in the socket, remember that the bushing is not symmetrical.
Mount the puller, the bolt is screwed in towards the front of the car.

4

obraz obsługa ściągacza TED42843 4
Place the wrench on the bolt head and start turning it while observing the position of the bushing. Position of the bushing can be vierified by observing marks made on the drive plate.

5

obraz obsługa ściągacza TED42843 5
Remove puller after pressing the bushing in by unscrewing the bolt and taking the plates off.

6

obraz obsługa ściągacza TED42843 6
Correctly installed element.

Puller applications:
Audi: A2, A3
VW, Polo, Caddy, Eos, Fox, Golf, Jetta, Passat, Touran,
Seat, Cordoba, Ibiza, Altea, Leon, Toledo,
Skoda, Fabia, Roomster, Octavia,

Manual shown above is just a presentation showing how the repair procedure can be made. TEDGUM® company does not bear responsibility for any errors in the manual and incorrect interpretation of the manual. Repair should be proceded by skilled personel with the use of appriopriate tools and with keeping all the safety means. All rights reserved.

Share on facebook
Share on twitter
Share on linkedin
Share on email
Share on print

More in this category

Do you want to be informed? Subscribe to our newsletter !