How to replace engine beam bushings in Renault Trafic?

In most cases, replacing metal-rubber bushings in beams is not complicated. However, there are cases where greater care should be taken to replace these elements so as not to damage other components. This is the case with the  Renault Trafic manufactured since 2001. The procedure for correct disassembly of Renault Trafic engine beam bushing is described below. Incorrect disassembly can damage the engine beam socket, after which the entire engine beam must be replaced.

How to correctly dissasemble engine beam bushings in Renault Trafic and how to install new bushings?

1

picture manual engine beam Renault 1
Lubricate the connection between the washer and the inner bushing.

2

picture manual engine beam Renault 2
Remove the washer by prying it from both sides and by tapping the inner sleeve with a hammer.

3

picture manual engine beam Renault 3
The washer will disassemble from the inner bushing.

4

picture manual engine beam Renault 4
Under the beam, place the bushing (2), press the inner bushing by pressing with sufficient force on the mandrel (1). The rubber will break off and will allow to disassemble it .

5

picture manual engine beam Renault 5
The photo shows a pressed out inner bushing from the beam.

6

picture manual engine beam Renault 6
Using a metal saw, cut the remaining rubber and the outer bushing. Take care not to damage the socket in the engine beam.

7

picture manual engine beam Renault 7
To remove the outer bushing from the socket, lubricate the connection point of the outer bushing to the socket.

8

picture manual engine beam Renault 8
Put a tapping screwdriver in place of the cut outer bushing and hit it with a hammer several times.

9

picture manual engine beam Renault 9
The photo shows the removed bushing from the engine beam.

Incorrect disassembly process:

1

picture manual engine beam Renault 1 - incorrect
Do not press the bushing out of the beam seat without removing the washer first. This will damage the beam because the washer is based on the socket.

2

picture manual engine beam Renault 2 - incorrect
Pressing a new bushing in will not be possible. The socket is damaged and the replacing of whole engine beam is necessary.

Engine beam components for Renault Trafic:

Simplified diagram of the engine beam in Renault Trafic (2001 – 2014)
5
7

00581104

ENGINE SUBFRAME BUSHING L=R (REAR)

9
10

00581387

ENGINE SUBFRAME BUSHING L=R (FRONT UPPER)

8
11

00581389

ENGINE SUBFRAME BUSHING L=R (FRONT LOWER)

8
11

00587132

POLYURETHANE – ENGINE SUBFRAME BUSHING L=R (FRONT LOWER)

Other elements do Renault Trafic:

Manual shown above is just a presentation showing how the repair procedure can be made. TEDGUM® company does not bear responsibility for any errors in the manual and incorrect interpretation of the manual. Repair should be preceded by skilled personnel with the use of appropriate tools and with keeping all the safety means. All rights reserved.

Share on facebook
Share on twitter
Share on linkedin
Share on email

More in this category

Company
Cooperation
Information
Stay in touch
Facebook-square Youtube Twitter Linkedin-in Instagram
Subscribe to our Newsletter
do góry

Do you want to be informed? Subscribe to our newsletter !

We would like the use of our website to be comfortable for all users. This is possible thanks to the storage of cookies in the user’s browser and the processing of anonymous data for statistical purposes by TEDGUM Tadeusz Wojciechowski, based in Ruda Śląska 41-708, ul. Zabrzańska 22 and its Trusted Partners. Our Privacy Policy contains all information regarding the method and scope of data processing. The user may at any time ask for sharing and changing the data stored by the website administrator.

I understand